Blizzard Blok 2 IP

Blok 2™ IP fixtures come with a built-in wireless AnyFi™ receiver that supports W-DMX™ and our own Skywire™ 2.4Ghz wireless DMX protocol, so it can receive wireless DMX from any Blizzard transmitter such as our wiCICLE™ and Lightcaster™ products. The fixture has no fans due to its solidly constructed cast aluminum housing with heat sink that naturally dissipates any heat. It also has a tempered glass lens and watertight internal gaskets, which protect the light source, antenna, status LEDs, and the easy-to-use Micro OLED control panel with 4 touch sensitive electronic buttons.

The ideal size and shape to blend into any environment, this IP65 rated gem is loaded with quality components and top-notch features. Blok 2™ IP fixtures come fitted with 2x high output 25W RGBW+UV 5-in-1 COB LEDs with a 30° beam angle, plus, it goes anywhere light is needed thanks to its internal Intelion™ lithium-ion battery system. Use them freestanding almost anywhere wirelessly and without power cords as an uplight, or, mount it via its secure dual mounting brackets!

Specs
Beam Angle
30°
Light Source
2x 25W RGBW+UV 5-in-1 COB LEDs
Max. Operating Temp.
104 degrees F (40 degrees C) ambient
Protocol
USITT DMX-512
Control
DMX Channels: 5/6/8/11-channel DMX
3-pin XLR male input + 3-pin DMX In/Out splitter cable
Standalone, Master/Slave, Auto Mode
AnyFi™ Wireless Receiver
W-DMX™ Receiver (Frequency Hopping Protocol)
Skywire™ 6/7-channel Receiver Mode
Less Than 5ms Latency
Receiver Sensitivity
-94dBm
Power
100V-264VAC, 47-63HZ
Power Consumption
41W, .6A, PF: .6